The RoadCraft web site uses cookies to improve the shopping experience - find out more close

Marine Anti-Fouling

Download Technical Data Sheet Download Health And Safety Sheet
 
Teamac Antifouling 'A' is a modified rosin based composition containing a high level of Copper Thiocyanate to give good antifouling performance. Suitable for Aluminium hulls.  Designed for vessels with a max speed of 25 to 30 knots. Expected functional life of the coating is 18 to 24 months. H.S.E. Approval No. 8960
 

Recommended Uses

Teamac Antifouling "A" is used as an antifouling for the underwater areas of marine vessels or underwater structures. Suitable for domestic and commercial vessels with aluminium, steel, wood, or GRP hulls.


Surface Preparation

Ensure the surface is clean and dry. Check compatability of Teamac Antifouling 'A' with the existing coating. If in any doubt contact Technical Services on 01482 320194.
 
On exposed metal and wood; prime first with at least 2 coats of Teamac Metaclor Underwater Primer (but not more than 3). On GRP lightly abrade exposed surfaces and apply 2 coats of Antifouling direct.
On aluminium; ideally abrade the surface to provide a "key", clean, then immediately coat with Metaclor Primer. When dry apply 2nd coat. If abrasion is not possible, the surface must be degreased and treated with 'T' Wash/Mordant solution (leave to react for 2
hours), follow the instructions on the pack. When this is clean and dry apply the 2 coats of Metaclor Primer, then 2 coats of Antifouling 'A'.
 
New steel: Abrasive blast clean to Sa2½ and apply Teamac Metaclor Underwater Primer. If applying onto shop-primed steel ensure that surface is dry and clean, and areas of damaged primer are suitably cleaned prior to the application of the METACLOR.
 
Maintenance: Remove all loose and damaged existing coating and all marine growth. High pressure wash with fresh water. Areas of breakdown should be blasted or power tool cleaned. Touch up with Metaclor Primer to the full existing film thickness. Prior to the application of the full coat ensure that surface is clean and free of all contaminates. 
 

Preceding Coat

Teamac Metaclor Underwater Primer on metal, wood and aluminium. Apply direct to GRP.
 

Subsequent Coat 

 
Cleaning Solvent: Thinners 17
 
Applcations Special Conditions: Application by spray is only permitted by professionals. Amateur use must be by brush or roller.
 

Users must comply fully with all their legal responsibilities under the Control of Pesticides Regulations 1986 (as amended), including complying with all conditions of approval. H.S.E. Approval No 8960. Launch time after painting - minimum 8 hours, maximum 3 months if shrouded from direct sunlight. Minimum 2 coats. 
 

Please read data sheets carefully prior to application.

Teamac Anti-Fouling A

A physically ablative anti-fouling offering excellent performance and protection.

Can be applied to Aluminium (please see data sheet).

Wears away at a controlled speed for vessels with a maximum speed of 25-30 knots.

Compatibility good

Variations

Please select a colour to see size/pack options:

Black
£88.44
Blue
£88.44
Red
£88.44
White
£88.44

Please note that the colour swatches above are representative only. This product's actual colour may differ. For further details please contact us.

Quantity

Spinner

Price: £88.44

£106.13 incl VAT

Disclaimer: All products purchased via this website must be used in conjunction with the product data information provided.
Roadcraft Safety Products Ltd cannnot be held responsible for any performance failures where mixing or application instructions have not been adhered to.